Skip to main content
Open 24 Hours a Day, 7 Days a Week

Thermostat Installation and Replacement

We install, wire and program thermostats for AC, furnaces and heat pumps, and test the system to confirm it works.

How thermostat installation works

A thermostat is the control center for your system. Installing one correctly means matching it to your equipment, wiring it properly and setting it up so it does what you expect. Our technician checks your system type, whether single-stage or multi-stage, a heat pump or a furnace with AC, and the existing wiring. We then choose a compatible thermostat, install and wire it, configure the settings and test heating and cooling.

The steps:

  • Check equipment type and wiring
  • Turn off power and remove the old thermostat
  • Mount and wire the new thermostat
  • Configure for your system, including heat pump settings where needed
  • Connect Wi-Fi and the app on smart models
  • Test cooling, heating and fan operation
  • Walk you through programming and schedules

Programmable or smart

  • Programmable thermostats follow a daily or weekly schedule you set
  • Smart thermostats learn patterns, offer remote control by phone and can show run-time information
  • Basic thermostats are simple and reliable for homes with predictable schedules

We explain what fits your home. A smart thermostat on a system that is struggling will not cure the problem, but it can help you use the system more efficiently. Our heating page notes that a smart thermostat can reduce energy bills, and results depend on how you use it.

Signs you need a new thermostat

  • The thermostat does not match the actual temperature
  • The system does not respond or runs constantly
  • Blank screen or dead batteries that keep dying
  • Cooling and heating cycle unexpectedly
  • You want scheduling or remote control
  • An old mercury thermostat that you want replaced

Thermostat settings for Arizona

In summer, raising the setpoint a few degrees when you are away saves energy, while very large setbacks make the system work hard to catch up in extreme heat. Programming a gradual schedule helps. In a home with heat pump equipment, aggressive setbacks can trigger backup heat. A technician can set it up appropriately for your system. Thermostat placement matters too: out of direct sun and away from vents.

What to expect on the visit

Your technician calls ahead and arrives at the time we gave you. Before touching anything, they ask what you have noticed: when the problem started, whether it happens at certain times of day, and anything that changed recently. Then they test the system rather than guessing, checking airflow, temperatures across the coil, electrical readings and the thermostat's signal. You see the findings in plain language and get a written price for the repair or the options before any work begins. If you approve the work, the diagnostic fee is waived. Most repairs are finished on the first visit because the truck is stocked with the parts that fail most often in Arizona heat. Afterward the technician tests the system again, cleans up, and tells you what to watch for.

Why Elite Pro Services

Elite Pro Services is one licensed, insured company for heating and cooling, plumbing and electrical work, based in Gilbert and serving Gilbert, Chandler, Mesa, Tempe, Scottsdale and Phoenix. Our plumbing license is Arizona ROC CR-37, number 314628, and our HVAC license is CR-39, number 314629. You get the price before work starts, emergency service is available 24 hours a day, 7 days a week, and the same number reaches us for every trade: (480) 788-7473. We would rather explain a repair honestly than sell a replacement you do not need, and we would rather say a replacement is right than keep patching a failing system.

Wiring and compatibility details

Some smart thermostats need a common wire, called a C-wire, to power the display and Wi-Fi. If your system lacks one, our technician can run a new wire or install an adapter. Heat pumps need the thermostat configured for the reversing valve, and systems with two stages of cooling or heating need a thermostat that supports them. Checking this before you buy avoids returns and callbacks.

After installation

We show you how to set schedules, use the app and change filters reminders. If you have older equipment, we explain any limits. Keep the manual and the account login with your records.

Frequently asked questions

Can you install a smart thermostat?

Yes. We install and set up smart and programmable thermostats.

Will a new thermostat work with my system?

We check compatibility before installation, including heat pump and multi-stage systems.

How long does installation take?

Usually under an hour for a standard replacement.

Can a thermostat cause my AC not to cool?

Yes. A faulty thermostat or wiring can prevent the system from operating correctly.

What temperature should I set in summer?

Many people choose a comfortable setting and avoid very large setbacks. We can recommend settings for your home.

Do you also repair HVAC systems?

Yes. See our AC repair and heating repair pages.

How do I schedule?

Call (480) 788-7473.

Related pages

Elite Pro Services serves Gilbert, Chandler, Mesa, Tempe, Scottsdale and Phoenix.

Call (480) 788-7473   Request a free estimate
Call nowFree quote