Water Heater Repair in the Phoenix East Valley
No hot water, a leaking tank or strange noises? Elite Pro Services repairs gas, electric and tankless water heaters, gives you the price first, and takes emergency calls 24/7.

Quick answer
Elite Pro Services repairs gas, electric and tankless water heaters in Gilbert, Chandler, Mesa, Tempe, Scottsdale and Phoenix. A licensed plumber finds the cause, you get the price before work starts, and emergency calls are answered 24/7 at (480) 788-7473. If the unit is leaking from the tank, repair is usually not possible and replacement is the safer choice.
Signs your water heater needs repair
- No hot water, or hot water that runs out much faster than it used to
- Water that is lukewarm, or that swings between hot and cold
- Rumbling, popping or banging from the tank
- Rusty or cloudy hot water
- A pilot light that will not stay lit, or a burner that will not ignite
- A tripped breaker or a heating element that does not heat
- Water around the base of the tank, or a leaking relief valve
- A tankless heater showing an error code or shutting off mid-shower
Common water heater repairs
Gas tank heaters. Typical repairs include thermocouple or flame sensor replacement, gas control valve repair, burner cleaning, relief valve replacement and venting corrections. Many "no hot water" calls on gas units trace back to the pilot assembly.
Electric tank heaters. Most repairs involve heating elements, thermostats, the high-limit reset or wiring. An electric unit can have two elements, and either one can fail, which is why a unit may produce some hot water but run out quickly.
Tankless heaters. Mineral scale from hard water is the leading cause of tankless problems. Repairs include descaling, cleaning the heat exchanger, replacing sensors and igniters, clearing intake and exhaust problems and correcting error codes.

Why Arizona water heaters fail early
Valley tap water is hard. Dissolved minerals settle at the bottom of a tank as sediment and coat heating elements and tankless heat exchangers. That layer makes the unit work harder, causes the popping or rumbling you hear and shortens its life. Heat in garages and attics adds stress to the connectors, valves and controls. Many Arizona water heaters sit in a garage, where summer temperatures stress the unit from the outside as well. An annual flush removes sediment before it becomes a repair. Our water heater flush page explains the service, and a tank that has gone years without one is more likely to need repair.
Repair or replace?
A repair makes sense when the part that failed is inexpensive and the tank is sound. Replacement is usually the better choice in these cases:
- The tank is leaking. Tanks cannot be patched, and a leak from the tank body means the steel has corroded through.
- The unit is near or beyond the age most tank heaters last, often around ten to twelve years
- Repairs are repeating, or the unit has no hot water capacity left
- Heavy sediment or corrosion is visible
We tell you honestly which one fits. If replacement is the right call, our water heater replacement cost guide lists current starting prices, and our water heater page covers installation. We also offer financing on qualifying replacements.
How a water heater repair visit works
- Call (480) 788-7473 and describe the symptoms. If the tank is leaking, shut off the cold-water supply valve above the heater and turn off the power or gas first.
- A licensed plumber inspects the unit, tests the controls, burner or elements and checks venting, gas and water connections.
- You get the repair price up front, in writing where possible. If you approve the repair, the diagnostic fee is waived.
- The plumber makes the repair, tests the system and shows you what was done.
Same-day service is often available when you call early.

What to do if the water heater is leaking
A small drip at the temperature and pressure relief valve can mean pressure or temperature is too high. Water pooling at the base usually means the tank has failed. Either way, shut off the cold-water supply valve at the top of the heater, turn off the power at the breaker or set the gas valve to Off, and call us. If water has reached the floor, protect nearby items and run a wet vac if you have one. A tank that is actively leaking should not be left running.
Preventing the next repair
- Flush the tank once a year to remove sediment
- Replace the anode rod when it is depleted, which extends tank life
- Test the relief valve annually, with the discharge pipe pointed to a safe drain
- Keep the area around the heater clear, and keep flammable items away from gas units
- Consider a softener where hard water is a recurring issue. See water softeners.
Our plumbing maintenance page explains yearly inspections.
Water heater repair by city
- Plumber in Gilbert
- Plumber in Chandler
- Plumber in Mesa
- Plumber in Tempe
- Plumber in Scottsdale
- Plumber in Phoenix
For a flood or sewer problem as well, see our emergency plumber page.
Frequently asked questions
Why is my water heater not making hot water?
On a gas heater it is often the pilot assembly, thermocouple, flame sensor or gas valve. On an electric heater it is usually a failed heating element, thermostat or tripped limit switch. A tankless unit may have scale, an igniter problem or a venting issue. A technician needs to test it to be sure.
How much does water heater repair cost?
It depends on which part failed and how long it has been failing. We diagnose first, give you the repair price before work starts and waive the diagnostic fee if you proceed. If you need a replacement, our cost guide lists current starting prices.
Is my water heater worth repairing?
If it is leaking from the tank, no. If the unit is fairly new and a single part failed, usually yes. We give you an honest recommendation and a free replacement estimate when replacement makes more sense.
Do you repair tankless water heaters?
Yes. We repair and descale tankless units, replace sensors and igniters, and diagnose error codes.
Can you fix a water heater at night or on a weekend?
Yes. Emergency calls are answered 24/7 at (480) 788-7473.
Why does my water heater make a popping or rumbling noise?
Sediment on the bottom of the tank traps water that boils and bubbles through the layer. Flushing the tank often reduces the noise. If it persists, the tank may be near the end of its life.
Related pages
Elite Pro Services serves Gilbert, Chandler, Mesa, Tempe, Scottsdale and Phoenix.
Call (480) 788-7473 Request a free estimate